How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 12172
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Onan Emerald III GenSet Model # 6.5NHEFA26100E 60 Hz I'm

Customer Question

Onan Emerald III GenSet
Model # *****
60 Hz
I'm trying to find out where wire 3 from the voltage regulator goes to. Does it go to TB1 (terminal block) L1?
Submitted: 4 months ago.
Category: Small Engine
Expert:  Hank F. replied 4 months ago.

Hello, my name is ***** ***** I am going to assist you with this.

Each of those wires will have a unique code stenciled on it.

What are the codes on the wires?

Expert:  Hank F. replied 4 months ago.

Did you get the codes from the wires yet?

Customer: replied 4 months ago.
My whole RV is in the shop until this upcoming weekend. I won't have access to the generator until then. Thanks for following up.
Expert:  Hank F. replied 4 months ago.

Ok, just let me know when you get the codes.

Related Small Engine Questions