How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Hank F. Your Own Question
Hank F.
Hank F., Technician
Category: Small Engine
Satisfied Customers: 14439
Experience:  Certified on Onan and Generac generators
Type Your Small Engine Question Here...
Hank F. is online now
A new question is answered every 9 seconds

I just replaced the fuel pump in my genset microlite 4000.

Customer Question

I just replaced the fuel pump in my genset microlite 4000. When I put everything back together there was no power to start switch. There is power to the terminal but not to the switch. Any Suggestions?
Submitted: 4 months ago.
Category: Small Engine
Expert:  Hank F. replied 4 months ago.

There is not supposed to be power to the switch. The switch operates a ground circuit, not a hot circuit.

If it was working before, but not now, you either have a wire disconnected, or left off, or you don't have good battery power to the genset.

Related Small Engine Questions