How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 25638
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I changed tne ring gear in it and I'm not getting any sparks

Customer Question

I changed tne ring gear in it and I'm not getting any sparks to the plug, is there a timing or setting to it?
Submitted: 4 months ago.
Category: Small Engine
Expert:  Curtis B. replied 4 months ago.

Did you remove the flywheel? Or just replaced the coil? Coil needs to be .010 inch from the flywheel surface when mounted. The magnet and the coil is all that make the spark on a Briggs engine. If still no spark, remove the kill wire on the coil and check for spark again, If you now have spark , the kill circuit is shorting out the spark.

Related Small Engine Questions