How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 27787
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a K582 in a Bolens HT23. It starts missing after

Customer Question

I have a K582 in a Bolens HT23. It starts missing after running a while. Replaced: coil,points,condenser,fuel pump and filter.
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.

Section 8.1 in the above manual link, shows the valve tappet adjustment. It think you will find the valves are too tight! The valves loose clearance when hot, and start to leak, causing the misfire! Try setting the valves .

Expert:  Curtis B. replied 1 year ago.

Did you get my response and try setting the valves?