How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 25691
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Need to knowhoew to replace spring on governor lever on &s

Customer Question

need to knowhoew to replace spring on governor lever on b&s 8hp 319cc tiller engine
JA: I'll do all I can to help. Tell me a bit more about what's going on so we can help you best.
Customer: I took off the complete plate for adjustment cannot figure out how to put the spring back
JA: Is there anything else the Small Engine Technician should be aware of?
Customer: not thati can think of thanks for youe help
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Small Engine Technician about your situation and then connect you two.
Submitted: 4 months ago.
Category: Small Engine
Expert:  Curtis B. replied 4 months ago.

need the model number of the engine!

Expert:  Curtis B. replied 4 months ago.

some examples

Customer: replied 4 months ago.
90402 083-01 B&S
Customer: replied 4 months ago.
irs on a JC Penny 319cc 8HP tiller.
Expert:  Curtis B. replied 4 months ago.

Can you double check the model number? 90402 is not shown.

Customer: replied 4 months ago.
tiller model number is *****
Expert:  Curtis B. replied 4 months ago.

I need the engine model number and the 90402 is not shown!

Related Small Engine Questions