How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 26054
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I Have a swisher ZT2452A zero turn mower I cannot get the

Customer Question

I Have a swisher ZT2452A zero turn mower I cannot get the front of the deck to raise. I have adjusted according to the owners manual but only the back will raise.
Submitted: 6 months ago.
Category: Small Engine
Expert:  Curtis B. replied 6 months ago.

Deck is adjusted only on the rear, the lift frame has to lift the front , along with the rear. it has brackets on the front of the deck that lift it, and uses pins to attach deck to the lift frame. Can pins be out or the brackets bolted to the deck loose?

Customer: replied 6 months ago.

I see the bracket # ***** on deck diagram parts list say requires 4 I only a place for 2 in the diagram.

Expert:  Curtis B. replied 6 months ago.

Should be two for front and two for rear.

Customer: replied 6 months ago.

Ok that would explain it but where do they hook up to I cant find any kind of diagram showing how they bolt on.

Expert:  Curtis B. replied 6 months ago.

Did you look at the deck lift linkage group in the manual?

Customer: replied 6 months ago.

Yes I do not see them. This is driving me nuts. Every diagram I find only shows the two from the rear to the frame of the mower.

Expert:  Curtis B. replied 6 months ago.

# ***** and # ***** show to be lifter brackets for the deck. where are they?

Customer: replied 6 months ago.

Both 47 and 29 are on the deck. 29 is the bent bracket I only have 2 parts list show 4 needed. 47 seem to be bolted to deck on each side. They are on the deck.

Expert:  Curtis B. replied 6 months ago.

on the front or the rear? They don't pin to the lift linkage?

Customer: replied 6 months ago.

Mine are pinned to a metal flat bar that bolts to the lift arm above.

Expert:  Curtis B. replied 6 months ago.

pictures you can attach using the paperclip icon above the typing bar?

Customer: replied 6 months ago.

Ok will try to get picture tomorrow. Thanks for sticking with me.

Expert:  Curtis B. replied 6 months ago.

Thanks!

Customer: replied 5 months ago.

Was able to get picture hope this helps. Cannot get pictures to load. can I upload them to you another way.

Customer: replied 5 months ago.
Relist: Other.
I still do not know what the problem is
Expert:  Curtis B. replied 5 months ago.

You can email them to the site, if you can't attach using the paper clip icon. Just reference your question.

Customer: replied 5 months ago.

Ok I sent pictures through a reply to one of your emails to me. Hope that works.

Customer: replied 5 months ago.

Sent pictures through reply to one of your emails. Hope this works.

Expert:  Curtis B. replied 5 months ago.

I have not seen any pictures yet!

Customer: replied 5 months ago.

Got message from just answer said e mail was to big. Is their another way to send email to just answer?

Expert:  Curtis B. replied 5 months ago.

Make pictures smaller!