How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 26744
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a Dixon ztr 428 the center cone and pulley move back

Customer Question

I have a Dixon ztr 428 the center cone and pulley move back and forth is that normal I keep throwing drive belt
Submitted: 10 months ago.
Category: Small Engine
Expert:  Curtis B. replied 10 months ago.
The center cone should have no side to side movement. I has to be rigid to let the cones work against it. It has bearings top and bottom that it rotates on.
Expert:  Curtis B. replied 10 months ago.
http://www.dixon-ztr.com/ddoc/DIXI/DIXI1987_USen/DIXI1987_USen__I8709004.pdf
Expert:  Curtis B. replied 10 months ago.
parts book link.
Customer: replied 10 months ago.
What could be problem
Customer: replied 10 months ago.
Is this something that can be fixed without complete teardown
Customer: replied 10 months ago.
It moves forward and backwards not side to side