How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Oliver Your Own Question
John Oliver
John Oliver,
Category: Small Engine
Satisfied Customers: 147
Experience:  manager at White Eagle Ag and Truck Services
93794869
Type Your Small Engine Question Here...
John Oliver is online now
A new question is answered every 9 seconds

I have gf1800 that I have to load on trailer but it won't start

Customer Question

I have gf1800 that I have to load on trailer but it won't start so I have to disengage the hydrostatic transmission where are the pins to do this
Submitted: 6 months ago.
Category: Small Engine
Expert:  John Oliver replied 6 months ago.
good afternoon. lets start with the basics.... when you say it wont start do you have a crank no start condition or it cranks and wont fire?
Customer: replied 6 months ago.
It's not going to start I have to load it on my trailer and it won't move I need to know how to disengage the hydrostatic drive so it will roll
Customer: replied 6 months ago.
Where are those pins or whatever they are called..
Customer: replied 6 months ago.
Hope you can hel soon it's getting dark
Expert:  John Oliver replied 6 months ago.
stand by
Expert:  John Oliver replied 6 months ago.
well...bad news... it seems that Kubota doesn't install those relieve buttons on that machine. if they existed they would be located onto of the hydro one top one bottom. but again....according to the ops and service manual they do not exist
Customer: replied 6 months ago.
So there is no way to move it from where it is to on the trailer
Expert:  John Oliver replied 6 months ago.
other than dragging it or winching it not really. lock the park brake and drag that dead animal