How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 13160
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I replaced my drive belt and one of the pulleys. My mower

Customer Question

I replaced my drive belt and one of the pulleys. My mower would run prior to replacing the pulley but would not move. Now, the mower will crank but will go dead after I release the clutch. It will stay running as long as the clutch is pressed. What could cause this issue?
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.
Seat switch or the harnes to it from the brake switch.
Customer: replied 1 year ago.
Thanks Curtis. I will look into that now.
Expert:  Curtis B. replied 1 year ago.
OK>