How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Donald Your Own Question
Donald
Donald, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1800
Experience:  I have 25+ years of experience repairing 2 & 4 cycle engines
72377906
Type Your Small Engine Question Here...
Donald is online now
A new question is answered every 9 seconds

How to change hydro belt on Gravely ZT HD 48? Belt is upper

Customer Question

How to change hydro belt on Gravely ZT HD 48? Belt is upper one below engine with an arm with spring. Where do I install this spring?
Submitted: 7 months ago.
Category: Small Engine
Expert:  Donald replied 7 months ago.
Hello. Thank you for choosing Just Answer. My name is***** will be happy to assist you. I will attach an image that shows where your spring attaches. I highlighted the location with red arrows.
Expert:  Donald replied 7 months ago.
Click on the link below to open image.
Expert:  Donald replied 7 months ago.
You can use a piece of rope, to pull your spring, to attach it, after you have put your belt onto all of your pulleys.
Expert:  Donald replied 7 months ago.
Just loop your rope over the hook on your spring. The rope makes stretching the spring a lot easier. You and I can continue from here.