How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 12592
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I replaced the solinoid and when I did, I turned the igniton

Customer Question

I replaced the solinoid and when I did, I turned the igniton switch and herd what sounded like a fuse blow. what was it?
Submitted: 7 months ago.
Category: Small Engine
Expert:  Wayne replied 7 months ago.
Hi I'm WayneI will help you with this what solenoid did you replace ??
Customer: replied 7 months ago.
starter solinoid
Expert:  Wayne replied 7 months ago.
Thank you for that did you mix up the wires for the solenoid or is one of the small wires touching ground let me know
Customer: replied 7 months ago.
no
Expert:  Wayne replied 7 months ago.
Hi did this pop the fuse before you replaced this what was the reason for replacing it
Customer: replied 7 months ago.
no it didn't pop a fuse. I replaced it because it would go clik clik and the starter checks good
Expert:  Wayne replied 7 months ago.
Thank you for that OK, that only says, you have the wrong solenoid, with a internal ground , or a wire is pinched