How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Donald Your Own Question
Donald
Donald, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1796
Experience:  I have 25+ years of experience repairing 2 & 4 cycle engines
72377906
Type Your Small Engine Question Here...
Donald is online now
A new question is answered every 9 seconds

Cub Cadet ser# 1C127H10130 3/2007 LTD1040 Model 13AX10CG709 Problem:

Customer Question

Cub Cadet ser# 1C127H10130 3/2007 LTD1040 Model 13AX10CG709
Problem: I replaced the drive belts(###) ###-####and(###) ###-#### ***** shorter one first - all went well. Now replaced the longer one and now the peddle must be totally extended or the cub won't move. Any backoff and it stops. How can this be adjusted back to normal?
Can't find guidance anywhere.
DJ
Submitted: 6 months ago.
Category: Small Engine
Expert:  Donald replied 6 months ago.
Hello DJ. My name is***** will be happy to assist you. Is your long belt properly routed around your two idler pulleys? Belt Routing - Click Here
Expert:  Donald replied 6 months ago.
Service Manual - Click Here
Expert:  Donald replied 6 months ago.
DJ, check out the information above. You and I can continue from here. Thanks!