How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 26038
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

All safety switch seem to be working. I have voltage at the

Customer Question

All safety switch seem to be working. I have voltage at the pro and when I engage the pro I have voltage leaving it going to the clutch, but I don't have voltage at the connector at the clutch. Need help
Submitted: 7 months ago.
Category: Small Engine
Expert:  Curtis B. replied 7 months ago.
If the switch has voltage , and no voltage to the pto clutch, the wire between is broken or damaged or has bad connection. Some models have a relay in between, so maybe I need you long model number to double check if it has pto relay. I do not think it does!