How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 27085
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a dlt 3000 tractor. I removed deck to put on snow plow,

Customer Question

i have a dlt 3000 tractor. I removed deck to put on snow plow, now I got everything together, but the cable wont go back on tentioner pulley, and I have a small sping that goes somewhere. please help a gal who is mechanically inclined.
Submitted: 11 months ago.
Category: Small Engine
Expert:  Curtis B. replied 11 months ago.
Full model number? Do you have the owners manual, it shows the deck and cable connection, with spring.
Customer: replied 11 months ago.
No model number and no manual.
Customer: replied 11 months ago.
I am about 2" shy of getting the cable on the pulley
Expert:  Curtis B. replied 11 months ago.
Model number is ***** tag under the seat!
Expert:  Curtis B. replied 11 months ago.
http://www.shopyourway.com/manuals/16929
Expert:  Curtis B. replied 11 months ago.
Page 21 for model###-##-####shows deck install.
Customer: replied 11 months ago.
I know this. I seen the manual on line. You aren't anyhelp.
Expert:  Curtis B. replied 11 months ago.
!!
Expert:  Curtis B. replied 11 months ago.
Why was I trying? You need more muscle? Use a wire or small rope to stretch the spring to get it in place!
Expert:  Curtis B. replied 11 months ago.
Is this the spring on the deck cable? Put spring on, then pull the cable housing and fasten it in the bracket on the housing. Do bracket last, not first!