How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JohnF2015 Your Own Question
JohnF2015, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1000
Experience:  Owner/Service Technician at S & J Small Engines
Type Your Small Engine Question Here...
JohnF2015 is online now
A new question is answered every 9 seconds

How to replace lift lever wire part 159460

Customer Question

how to replace lift lever wire part 159460
Submitted: 6 months ago.
Category: Small Engine
Expert:  JohnF2015 replied 6 months ago.
HI, my name is***** will be assisting you.You will need to remove the handle grip on the lift lever, then drive the pin out of the lift cable at the bottom of the lift lever which will then allow you to pull the old cable up and out of the lift handle. Insert the new cable into the lift handle, drive the pin back into the lower part of the cable reinstall the grip on the lift lever and you should be ready to move on to other things.It has been a pleasure to assist you.Please take a moment to rate your experience.

Related Small Engine Questions