How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Briggs-Fan Your Own Question
Briggs-Fan
Briggs-Fan, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1200
Experience:  over 15 years experience in small engine repair, multiple certifications
75998144
Type Your Small Engine Question Here...
Briggs-Fan is online now
A new question is answered every 9 seconds

I have a chainsaw, mod###-##-#### ***** spark plug and

Customer Question

I have a chainsaw, mod###-##-#### ***** spark plug and coil, I get no spark. The kill switch working
Submitted: 7 months ago.
Category: Small Engine
Expert:  Briggs-Fan replied 7 months ago.
Hi my name is ***** ***** welcome to Just Answer. Unhook the ground wire from the coil and check for spark . Also do you have the coil property gapped
Customer: replied 7 months ago.
That was done before, where r the timing marks?
Expert:  Briggs-Fan replied 7 months ago.
It should have a shear key in the flywheel, the coil should be gapped by a business card .
Expert:  Briggs-Fan replied 7 months ago.
Hi just checking to see if you made any progress with the chainsaw? . Even with a sheared key it would have spark . Where did you get the replacment coil from ?
Expert:  Briggs-Fan replied 7 months ago.
Did you check the flywheel key for shearing ?