How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne
Wayne, Engine Rebuilder
Category: Small Engine
Satisfied Customers: 8428
Experience:  many years on egine rebuilding, lawn mower,roto tiller,Truck,and small engines
6825259
Type Your Small Engine Question Here...
Wayne is online now
A new question is answered every 9 seconds

Need water inlet ftg 1600

Customer Question

need water inlet ftg for k 1600
Submitted: 7 months ago.
Category: Small Engine
Expert:  Curtis B. replied 7 months ago.
https://www.pressureparts.com/mmDEV/PDF/karcherparts/K1.600%201.141-381.0.pdf
Expert:  Curtis B. replied 7 months ago.
See B2, shows two versions.
Expert:  Curtis B. replied 7 months ago.
http://www.amazon.com/Karcher-Water-Inlet-Elbow-9-001-188-0/dp/B004WCJI6E
Expert:  Curtis B. replied 7 months ago.
http://www.amazon.com/Karcher-Pressure-Inlet-90011870-9-001-187-0/dp/B001ISMZDI
Expert:  Wayne replied 7 months ago.
Hi I'm Wayne I will help you with this what you are describing is worn piston rings or valve guides , i suggest you adjust the valves both valves .004-.005 cold engine see if your plugs are oily wet , if yes then it is the piston ring I hope this helped you Hi If this helped you Please rate my answer 3 or more starIf not use the reply button, not Bad/Poor serviceThis is the only way I get Credit for the QuestionI took the time to answer you Please take the time to reply Wayne