How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 26519
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I'm at a loss! I'm working on a Yard Machine. I put the deck

Customer Question

I'm at a loss! I'm working on a Yard Machine. I put the deck on and it raises like it should. I attach the spring, on the rear of the deck to the axle, it puts the right side in a bind and the deck will not lower. Looking at the picture, the spring should be on the left side, but it came in on the right side, so I put it back the same way it came in. What am I missing?
Submitted: 10 months ago.
Category: Small Engine
Expert:  Curtis B. replied 10 months ago.
should have spring on each side! One is missing.
Customer: replied 10 months ago.
It came with only one spring and the drawing shows only one spring.
Expert:  Curtis B. replied 10 months ago.
Model number?
Customer: replied 10 months ago.
My bad, 13ah660f352. I'm going to put the spring on the other side and see what happens. But that is not the way it came in!!
Expert:  Curtis B. replied 10 months ago.
OK> easy fix, get another spring!
Customer: replied 10 months ago.
I just tried that, it didn't work. It's still binding on the right side.
Expert:  Curtis B. replied 10 months ago.
Rear hangers on the correct side of the brackets?