How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 12892
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Husqvarna YTH2348. Tractor starts but can not get it to move

Customer Question

Husqvarna YTH2348. Tractor starts but can not get it to move forward or backward. Blade engages will mot move. serial #062408A012506. Whats the problem?
Submitted: 11 months ago.
Category: Small Engine
Expert:  Wayne replied 11 months ago.
Hi I'm Wayne I will help you with this did you have ant of the rear tires off for a reasonLet me know ,Please
Customer: replied 11 months ago.
Tires have not been off
Customer: replied 11 months ago.
what happen to the $18.00 fee?
Customer: replied 11 months ago.
I gave my card info
Customer: replied 11 months ago.
Don't like to give out private info. Hope you are legit. Waiting for your call.
Customer: replied 11 months ago.
When will he call?
Customer: replied 11 months ago.
Does he know how to correct the problem?
Customer: replied 11 months ago.
Waiting for your reply.
Expert:  Wayne replied 11 months ago.
HiSorry for the delaywe work from home most of us, so get questions as they come inCheck to make sure the belt that runs from the engine pulley back to the transaxle is on all the pulleys.If it is a hydrostatic transaxle make sure the free wheel control lever at the back of the tractor is in correct position, or the brake plate may be stuck on but that would make aloud grinding sound.If it is a gear drive make sure thetransaxle pulley is turning