How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 26053
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

KEN HOW DO I TIME MY MODEL(###) ###-####5 THANK YOU JA: Thanks.

Customer Question

KEN HOW DO I TIME MY MODEL(###) ###-####5 THANK YOU
JA: Thanks. Can you give me any more details about your issue?
Customer: i SET THE TWO TIMING MARKS ON THE CAM AND THE CRANK IN LINE. THEN i WAS TOLD THE RIGTH WAY TO TIME IT WAS TO PUT THE PISTON @TOP DEAD CENTER THEN TURN THE CRANK 15 DEGG
JA: OK got it. Last thing — Technicians generally expect a deposit of about $18 to help with your type of question (you only pay if satisfied). Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 8 months ago.
Category: Small Engine
Expert:  Curtis B. replied 8 months ago.
NO< you have it right. The piston will NOT be at TDc!
Expert:  Curtis B. replied 8 months ago.
http://www.ccdist.com/_serviceManuals/briggs/276781.pdf
Expert:  Curtis B. replied 8 months ago.
See 137 in the manual link above.
Expert:  Curtis B. replied 8 months ago.
Please accept to close and get me credit.
Expert:  Curtis B. replied 8 months ago.
Did you see my response?
Expert:  Curtis B. replied 7 months ago.
I see qusetion is still open!