How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne
Wayne, Engine Rebuilder
Category: Small Engine
Satisfied Customers: 8456
Experience:  many years on egine rebuilding, lawn mower,roto tiller,Truck,and small engines
6825259
Type Your Small Engine Question Here...
Wayne is online now
A new question is answered every 9 seconds

I have a spark arrestor on my Craftsman###-##-####that is

Customer Question

I have a spark arrestor on my Craftsman###-##-####that is thoroughly rusted. I have soaked it with rust penetrant, overnight and it wont break loose. I have not stripped the Torx bolt heads yet.
Is there an easy way to get this off?
Submitted: 8 months ago.
Category: Small Engine
Expert:  Wayne replied 8 months ago.
Hi I'm Wayne I will help you with this there is no easy way due to the rust you can drill the head off, pull it offthen use vise grips to remove the studs other then than that, no nothing Hi. If this helped you Please rate my answer 3 or more stars.If you need more info, use the request button -Not Poor/Bad service.Wayne