How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 12592
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Elec Mower deck clutch on my John Deere mox300co12712 someone

Customer Question

Elec Mower deck clutch on my John Deere mox300co12712 someone put toggle switch for mower deck, the toggle switch has positive power to one side than wire on other side goes to clutch pulley put than it looks like a second wire at clutch pulley where does that go to, ground on frame or where else
Submitted: 8 months ago.
Category: Small Engine
Expert:  Curtis B. replied 8 months ago.
Clutch has to have one power wire and one negative/ground wire to complete the circuit. Wire at clutch can ground to frame, and one side of switch grounded to frame. Power has to come to switch, and go to one of the clutch wires.