How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 12592
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a Kioti ck 20 HST trying to remove pin with grease nipple

Customer Question

I have a Kioti ck 20 HST trying to remove pin with grease nipple on top holding the power steering cylinder on to the right hub. Have heated and it just will not come out. Is there a special way to get the pin out
Submitted: 8 months ago.
Category: Small Engine
Expert:  Curtis B. replied 8 months ago.
Do you have picture you could attach? What was holding the pin? You have it out? At shop, they would have a slide hammer, that would screw into the grease fitting thread, and use slide hammer to knock it out. Ir use big hammer and punch to knock it out from below.