How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 12822
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Change belt on 2013 snapper 12.5 H.P. Hydro-static drive

Customer Question

change belt on 2013 snapper 12.5 H.P. Hydro-static drive
Submitted: 11 months ago.
Category: Small Engine
Expert:  Wayne replied 11 months ago.

Hi I'm Wayne

I will help you with this

do you have the maintenance manual

it is listed on page 28

let me know

Customer: replied 11 months ago.
I only have a owners manual
Expert:  Wayne replied 11 months ago.

HI

See if this is the one you have

go to page 28, this is how to adjust,

and once loosened ,slip it off

click here

Customer: replied 11 months ago.
it is broken and I am trying to replace -page 28 in my book is battery replacement
Expert:  Wayne replied 11 months ago.

HI

Sorry it is page 26, shows the belt diagram

open that link and go to page 25-26

Customer: replied 11 months ago.
I am looking for file
Expert:  Wayne replied 11 months ago.

Hi

Go to where it syas click here above in my answer

Customer: replied 11 months ago.
I have the manual - but am looking what procedure to use to access the belt
Customer: replied 11 months ago.
my model is(###) ###-####and that is not noted on the manual download
Expert:  Wayne replied 11 months ago.

HI

You need to rop the deck,

and then flip it over to get to the deck

Wayne

Customer: replied 11 months ago.
Wayne - the dealer said it was an easy fix - just access a panel - but I don't see that happening - can we just end this chat - thanks
Joe
Expert:  Wayne replied 11 months ago.

Yes

Happy Easter to you and yours