How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 26054
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a table saw model number 152.221040. I am having

Customer Question

I have a table saw model number###-##-#### I am having trouble removing the table insert that protects the saw blade. I want to confirm that there is only one screw, the "insert retaining bolt", that holds the table insert to the saw body.
Submitted: 8 months ago.
Category: Small Engine
Expert:  Curtis B. replied 8 months ago.

There is only the single screw holding the insert in place. But it is doweled , so it has to be pried up to release it from the dowel pins .