How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 12650
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have replaced pto clutch and blade engaging switch and

Customer Question

Hi john I have replaced pto clutch and blade engaging switch and clutch will still not engage . I am getting 16 volts at the plug that attaches to pto clutch but still no engagement. The wires to the switch were damaged but I repaired them and getting voltage. What I am doing wrong? This is referring to a John Deere l 120 lawn tractor
Thanks Paul
Submitted: 9 months ago.
Category: Small Engine
Expert:  Briggs-Fan replied 9 months ago.

Hi Paul , my name is ***** ***** welcome to Just Answer was it working prior to the wires getting damaged ?