How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JohnF2015 Your Own Question
JohnF2015
JohnF2015, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1010
Experience:  Owner/Service Technician at S & J Small Engines
87465640
Type Your Small Engine Question Here...
JohnF2015 is online now
A new question is answered every 9 seconds

Onan Microlite 4000 - starter spins when fuse is installed

Customer Question

Onan Microlite 4000 - starter spins when fuse is installed and only quits when the fuse is removed.
Submitted: 9 months ago.
Category: Small Engine
Expert:  JohnF2015 replied 9 months ago.

Hi, my name is***** will be assisting you.

It sounds like the starter solenoid is stuck in the engaged position which will throw voltage to the starter all the time until you remove the fuse. I would replace the starter solenoid which should solve your issue.

Thank you it has been a pleasure to assist you.

Please take a moment to rate your experience.