How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JohnF2015 Your Own Question
JohnF2015
JohnF2015, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1013
Experience:  Owner/Service Technician at S & J Small Engines
87465640
Type Your Small Engine Question Here...
JohnF2015 is online now
A new question is answered every 9 seconds

I have a Oman 5500 and trying to take off the governor

Customer Question

I have a Oman 5500 and trying to take off the governor lever. Pulled clip off but how do you pull off?
Submitted: 9 months ago.
Category: Small Engine
Expert:  JohnF2015 replied 9 months ago.

Hi, my name is***** will be assisting you.

Once you have the clip off, you need to make certain to loosen the bolt that is in the lever and then you can usually remove the lever from the shaft however sometimes you may need to use a screwdriver to spread the lever open a little bit where the bolt goes through it. The lever should be slotted and you can normally pry it open a little to free it from the shaft.

Thank you it has been a pleasure to assist you.

Please take a moment to rate your experience.