How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Donald Your Own Question
Donald
Donald, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1798
Experience:  I have 25+ years of experience repairing 2 & 4 cycle engines
72377906
Type Your Small Engine Question Here...
Donald is online now
A new question is answered every 9 seconds

Toro z4202 model 74381 how do you remove electric clutch and

Customer Question

toro z4202 model 74381
how do you remove electric clutch and pulleys from crankshaft
Submitted: 9 months ago.
Category: Small Engine
Expert:  Donald replied 9 months ago.

Hello Allan. Thank you for choosing Just Answer. My name is***** will be happy to assist you.

Expert:  Donald replied 9 months ago.

Basically all you do, is first, disconnect the wiring connector from your pto clutch, then remove the bolt that is in the center of your pto clutch, with a 5/8" socket.

Expert:  Donald replied 9 months ago.

After you remove the bolt, your clutch and your pulley should slide off your crankshaft.

Expert:  Donald replied 9 months ago.

If your pto clutch, and your pulley does not slide off easily, you can use some penetrating oil, and a pry bar, to carefully pry down on your pto clutch, and your pulley.

Expert:  Donald replied 9 months ago.

It is best to use two pry bars, to pry both sides of your pulley at the same time.

Expert:  Donald replied 9 months ago.

You and I can continue from here. Thanks!