How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 26284
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

How do I install 73-0160 on a Toro 1800 Power Curve

Customer Question

how do I install 73-0160 on a Toro 1800 Power Curve Snowblower ?
Submitted: 11 months ago.
Category: Small Engine
Expert:  Curtis B. replied 11 months ago.

Page 5 shows the short drive belt, the left cover has to be removed to expose the drive. The outer drive belt has to be slipped off the small drive gear, by holding the idler up, to release tension on the loner auger drive bet, then the small pulley can be slipped back and the small belt accesed. Slip on the new drive belt, slip the pulley back into place, then the auger belt, by holding the idler away from the lower belt.