How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 13160
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a bobcat 250 nt welder machine it won't start I have

Customer Question

Hi I have a miller bobcat 250 nt welder machine it won't start I have changed fuel pump cleaned carburetor did a tune up and still won't start any help is appreciated
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.

Not clear as to what engine this would have. Do you know engine model? Do you have spark at the plugs when cranking? If you put fuel direct into cylinders and replace spark plugs, will engine fire and run for few seconds? Is there a solenoid in the carburetor? If so, it has to open the fuel as soon as switch is turned on.