How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne
Wayne, Engine Rebuilder
Category: Small Engine
Satisfied Customers: 9333
Experience:  many years on egine rebuilding, lawn mower,roto tiller,Truck,and small engines
6825259
Type Your Small Engine Question Here...
Wayne is online now
A new question is answered every 9 seconds

My rigid 680o will not start I chAnged the spark plug and

Customer Question

My rigid 680o will not start I chAnged the spark plug and gas it cranks fine but will not run
Submitted: 1 year ago.
Category: Small Engine
Expert:  Wayne replied 1 year ago.

Hi I'm Wayne

I will help you with this

Pull the plug wire off and plug out,

hook wire to plug ground it to the engine

crank it over and see if you are getting spark ,Please

let e know

Customer: replied 1 year ago.
getting spark
Customer: replied 1 year ago.
Any other ideas
Expert:  Wayne replied 1 year ago.

Thank you for that

OK, next is pour teaspoon gas in the plug hole install the plug

put choke to 1/2, and start , if it still don't start ,

then it is a carb issue, will need to get a bottle of Sea Foam

at auto parts or Hardware store , add 2-3 oz to fuel tank

then start and run with 1/2 choke

I hope this helped you

Hi if this helped you

Please rate my answer 3 or more stars

If you need more info, use request button

Not Poor/Bad service

Wayne

Expert:  Wayne replied 1 year ago.

Hi

Just following up with you

did my answer help you

let me know , Please

Wayne