How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 12773
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a 2E bluestar welding machine with a Tecumseh motor.

Customer Question

I have a miller 2E bluestar welding machine with a Tecumseh motor. I do not know what hp the motor is but I need a carburetor for it
the welder is old, but runs good. All I need is a new carburetor and a new gas tank. Can you tell me what specs on a carburetor for it?
Thanks
Mike Bludau
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.

The engine is and OH160, which is 16 horsepower. But to get an exact natch for carburetor, need to find the stamped number in the recoil cover, it will be near the spark plug area. It may be painted over, but should be there. I see some carburetors for OH160 on Ebay that will likely work.