How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 12592
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have an old HS50 Snow blower and found an auger cable

Customer Question

I have an old HS50 Snow blower and found an auger cable online. How do I insert the round T-shaped end into the bracket at the handle?
Submitted: 11 months ago.
Category: Small Engine
Expert:  Briggs-Fan replied 11 months ago.

Hi my name is ***** ***** welcome to Just Answer , is there any way you can take a picture of the bracket it goes in ? ,

Expert:  Briggs-Fan replied 11 months ago.

Most t cables it will fit one end of the t in first but I'm looking for your exact bracket

Expert:  Briggs-Fan replied 11 months ago.

Have you tried putting the one end in and moving it all the way over so the post is against the side the cable us in then try to push the other end up to go through the other hole