How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 26033
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Husqvarna LTH 19530. I've changed the cutting deck control

Customer Question

Husqvarna LTH 19530. I've changed the cutting deck control cable and can't figure out how to secure the outer sheath at the front end.
Submitted: 12 months ago.
Category: Small Engine
Expert:  Curtis B. replied 12 months ago.

The sheath at the deck end?

Expert:  Curtis B. replied 12 months ago.

# ***** is the bracket, the cable slips in from side on slot, and is twisted to keep it from pulling back through. I have seen model that just slipped through and used a clip pin to hold cable from being pulled out.

Expert:  Curtis B. replied 12 months ago.

Page 21 in owners manual link shows the cable and connection!

Expert:  Curtis B. replied 11 months ago.

Did you get cable latched? Please rate to close.