How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 27118
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I need to know how to remove the engine from the flywheel on

Customer Question

I need to know how to remove the engine from the flywheel on a cub cadet cs2210 chipper shredder
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.

I assume you mean # ***** , the impeller? You want the impeller off the crankshaft. Bolt is all that holds it, it will be tight from rust and corrosion. Take the bolt, less the washer and retainer, and reinstall it in the crankshaft ,then hold a strain on the impeller and tap on the bolt , to see if it will loosen the impeller.

Expert:  Curtis B. replied 1 year ago.

Heat applied to the impeller will also help loosen it, do you have a torch to heat the impeller?