How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 12592
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

WHAT SIZE GOES ON THE END OF THE IMPELLOR ASSEMBLY OF

Customer Question

wHAT SIZE NUT GOES ON THE END OF THE IMPELLOR ASSEMBLY OF CRAFTSMAN ELECTRIS BLOWE VACUUM MODEL151.30376
Submitted: 1 year ago.
Category: Small Engine
Expert:  Vince O. replied 1 year ago.

Hello, it's been a while since I worked on one but I believe it is an 8mm fine thread nut. If the original was a flange nut you will need a washer and lock washer