How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 26764
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Just trying to wire up an intek Briggs to my sander. Someone

Customer Question

Just trying to wire up an intek Briggs to my sander. Someone else had removed the old engine and I'm left holding the cards There is a nine wire harness which I have the schematic for, I just don't know how that applies to the new briggs with the three wires total coming off of it
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.

See if this will help. it has all the Briggs wireing setups.

Related Small Engine Questions