How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JohnF2015 Your Own Question
JohnF2015
JohnF2015, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1100
Experience:  Owner/Service Technician at S & J Small Engines
87465640
Type Your Small Engine Question Here...
JohnF2015 is online now
A new question is answered every 9 seconds

Mod 111p 020007 F1 175 cc engine, a spring fell off the and

Customer Question

mod 111p 020007 F1 175 cc engine, a spring fell off the carburetor and I don't know exactly how it goes back on
Submitted: 1 year ago.
Category: Small Engine
Expert:  JohnF2015 replied 1 year ago.

Hi, my name is***** will be assisting you.

Can you provide a little more information about which spring come off? I can help you with making certain that it is all hooked back up properly.

Customer: replied 1 year ago.
its a fine wire spring about 1/4 od,about 3/4 inch lonf, the engine wont start as is,with ether it will run as long as the ether is available
Expert:  JohnF2015 replied 1 year ago.

It sounds like the spring that you are referring to goes to the ready start choke feature on the engine. I am sending over a picture of the spring and location that might help you. The spring will attach to the choke assembly on one end and the other end will hook onto a stationary tab on part of the plastic assembly on the top of the carburetor that sticks out toward the engine with a little tab on it(the spring hooks over the tab on that end).

Customer: replied 1 year ago.
sounds about right,i think the picture will help a lot,thanx
Expert:  JohnF2015 replied 1 year ago.

Let me know if I can be of additional assistance or if you anything else.

Thank you it has been a pleasure to assist you.

Please take a moment to rate your experience.

Customer: replied 1 year ago.
will go try it now
Expert:  JohnF2015 replied 1 year ago.

Just let me know if I can be of further assistance.