How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 26052
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a 2010 RXV it wont run. Switch the run /tow switch to

Customer Question

I have a 2010 RXV it wont run. Switch the run /tow switch to tow and still cant push it to load on trailer. Is there some way to override brakes?
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.

You can remove the three or four bolts that hold the brake to the drive motor ,then it will roll.

Expert:  Curtis B. replied 1 year ago.

The brake has to have 48 volts for it to release, you can jump it direct from battery pack if voltage is up.