How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JohnF2015 Your Own Question
JohnF2015
JohnF2015, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1017
Experience:  Owner/Service Technician at S & J Small Engines
87465640
Type Your Small Engine Question Here...
JohnF2015 is online now
A new question is answered every 9 seconds

I have a toro wheel horse 518xi and the traction control

Customer Question

I have a toro wheel horse 518xi and the traction control pedal is real sloppy and does not come back to neutral when released?
Submitted: 1 year ago.
Category: Small Engine
Expert:  JohnF2015 replied 1 year ago.

Hi, my name is***** will be assisting you.

The most likely problem that you have is a bad damper control. There is one on either side of the machine and normally when one side goes bad the other one isn't too far behind. It is Toro part number #103-2913 and can be purchased through your local Toro dealer or online through a number of different websites. They both are the same so there is no difference left to right if you wanted to get two of them and replace them both.

Thank you it has been a pleasure to assist you.

Please take a moment to rate your experience.

Expert:  JohnF2015 replied 1 year ago.

I have included a diagram for you so that you can see what the damper looks likes and where it is located. It is reference #8 in the picture.