How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 12892
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

My i1042 quit moving the drive belt is ok and all the pullys

Customer Question

my i1042 quit moving the drive belt is ok and all the pullys are moving
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.

See link, above, To loose drive in both transmissions the belt is the only common part.

Expert:  Curtis B. replied 1 year ago.

Did it quit under use? Be sure you ar looking at the drive belt for the transmission and not the deck belt.