How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 26033
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a Workforce Power Washer 163cc Model 80710. Ran fine

Customer Question

I have a Workforce Power Washer 163cc Model 80710. Ran fine last spring ... put stabilizer in the gas .. now will not start .. I have spark ... acts like its not getting gas although I can trace the line right up to the entrance to the carb and there is gas there, it will run for 5 seconds on either
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.

The needle valve passage is plugged, or it is swollen from ethanol.

Expert:  Curtis B. replied 1 year ago.

The needle valve passage is plugged, or it is swollen from ethanol.

Expert:  Curtis B. replied 1 year ago.

Remove the fuel bowl, and check for fuel flow.

Expert:  Curtis B. replied 1 year ago.

The needle valve and seat may need to be replaced.