How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 26277
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

How can I get 110v, 60amp out of my 7000k generator.? My

Customer Question

Hello, How can I get 110v, 60amp out of my 7000k generator. ? My generator has several outlets. 1) 110v-20amp (single phase), 110v-20amp(single phase), 110v-30amp (single phase) and 110v--30amp (two-phase) How would I connect to connect my LED Displays.
?
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.

Are you sure about the LED rating?What kind of displays require 60 amps???

Expert:  Curtis B. replied 1 year ago.

LEDs have very low amp requirements!

Expert:  Curtis B. replied 1 year ago.

Displays would have to be wired separably and attached to two or more of the 110 outlets!

Customer: replied 1 year ago.
Hi Curtis,
Please be more specific as to how I can wire it and connect it. So, it is possible to get 60 amps from 3 different outlets? (20+20+30) How can I combine the wires from all 3 outlets? use a disconnect box? or some other type of box?
Expert:  Curtis B. replied 1 year ago.

What I don't understand is the amp requirement. 60 amps would take a huge cord to carry the amps. Load has to be distributed between the outlets. What are you wiring up? Pictures? model?

Customer: replied 1 year ago.
How do I distribute the load? What is the size of the huge cord?
Expert:  Curtis B. replied 1 year ago.

Where are the power requirements? Data tag? I see nothing that shows me 60 amp load!

Customer: replied 1 year ago.
they told me. 3.8kw, 60amp--110v
Expert:  Curtis B. replied 1 year ago.

Sorry, I can't help. I will opt out . And I suggest you find an electricin to make the intial connections.