How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JohnF2015 Your Own Question
JohnF2015
JohnF2015, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1079
Experience:  Owner/Service Technician at S & J Small Engines
87465640
Type Your Small Engine Question Here...
JohnF2015 is online now
A new question is answered every 9 seconds

I put a new belt on my Deere z225 zero turn, but it won't

Customer Question

I put a new belt on my John Deere z225 zero turn, but it won't engage now....
Submitted: 1 year ago.
Category: Small Engine
Expert:  JohnF2015 replied 1 year ago.

Hi, my name is***** will be assisting you.

Are you certain that the belt is routed onto all of the pulleys properly?

Expert:  JohnF2015 replied 1 year ago.

What happened that made you have to replace the belt? Did the old one break? If so, take a good look at the wiring that goes to the electric clutch, sometimes when the belt breaks it will get into the wiring and damage the wiring that goes to the electric clutch.