How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask spankyjr1 Your Own Question
spankyjr1
spankyjr1, Journeyman
Category: Small Engine
Satisfied Customers: 2577
Experience:  I worked on all types of equipment semis,forklifts,farm,ect
65057319
Type Your Small Engine Question Here...
spankyjr1 is online now
A new question is answered every 9 seconds

Deere 1435 glo plug does not stay on enought to heat

Customer Question

john deere 1435 glo plug does not stay on long enought to heat combustion chamber
Submitted: 1 year ago.
Category: Small Engine
Expert:  spankyjr1 replied 1 year ago.

Good morning, sorry for delay, my name is ***** ***** you for asking your question, I will try and help you out.

usually when this happens the glow plug/s are shorted and need to be replaced.

When shorted the length of on time is a lot shorter since there is a higher amp draw, the glow plug control thinks they are hot enough

and cycle off.

Replace glow plugs, its straight forward job, remove wires and unscrew plug,,use never seize on new plug threads before installing new ones so they never seize in head and break when trying to remove.

Thanks