How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Hank F. Your Own Question
Hank F.
Hank F., Technician
Category: Small Engine
Satisfied Customers: 14675
Experience:  Certified on Onan and Generac generators
19372534
Type Your Small Engine Question Here...
Hank F. is online now
A new question is answered every 9 seconds

My 17 KW Generac says it is time maintenance -- clean

Customer Question

My 17 KW Generac says it is time for battery maintenance -- clean corrosion, check cable tightness, etc. The battery is in a hard-to-get-at corner of the unit. Do I have to disassemble part of the unit to get the battery out, or is there an easier way? This is a propane-fueled unit, with a cold start kit.
Submitted: 1 year ago.
Category: Small Engine
Expert:  Hank F. replied 1 year ago.

No, you should not have to disassemble anything.

Once you have the front panel pulled off, the battery should come out.

It is a tight fit on most units, but if the correct battery is in there, it will come out.