How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JohnF2015 Your Own Question
JohnF2015
JohnF2015, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1009
Experience:  Owner/Service Technician at S & J Small Engines
87465640
Type Your Small Engine Question Here...
JohnF2015 is online now
A new question is answered every 9 seconds

Tell me how to put the belt back on a 54" mowing deck.

Customer Question

tell me how to put the belt back on a 54" mowing deck.
Submitted: 1 year ago.
Category: Small Engine
Expert:  JohnF2015 replied 1 year ago.

Hi, my name is***** will be assisting you.

I have included a diagram of the belt routing on your machine. In order to get the belt on I would install it on the deck pulleys first then onto the engine pulley, it is usually easier to do it this way. Once on the other pulleys you can start it onto one side of the engine pulley then turn the pulley in order to get it on there.

Expert:  JohnF2015 replied 1 year ago.

Hi, my name is***** will be assisting you.

I have included a diagram of the belt routing on your machine. In order to get the belt on I would install it on the deck pulleys first then onto the engine pulley, it is usually easier to do it this way. Once on the other pulleys you can start it onto one side of the engine pulley then turn the pulley in order to get it on there.

Expert:  JohnF2015 replied 1 year ago.

Hi, my name is***** will be assisting you.

I have included a diagram of the belt routing on your machine. In order to get the belt on I would install it on the deck pulleys first then onto the engine pulley, it is usually easier to do it this way. Once on the other pulleys you can start it onto one side of the engine pulley then turn the pulley in order to get it on there.