How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Hank F. Your Own Question
Hank F.
Hank F., Technician
Category: Small Engine
Satisfied Customers: 14489
Experience:  Certified on Onan and Generac generators
19372534
Type Your Small Engine Question Here...
Hank F. is online now
A new question is answered every 9 seconds

I have a new controller board Generac 04109-0 (built around

Customer Question

I have a new controller board for my Generac 04109-0 (built around 1999). How do I get the top off the unit, so I can access the upper box that holds the controller board?
Submitted: 1 year ago.
Category: Small Engine
Expert:  Hank F. replied 1 year ago.

Hello, thank you for requesting me.

To get the top off, all you need to do is to remove the bolts from around the top, and then pry it off. Generac used some type of sticky sealant when they put that top on, and it can be a bit difficult to remove. But once started, it will come off fairly easy.

Related Small Engine Questions