How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JohnF2015 Your Own Question
JohnF2015
JohnF2015, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1013
Experience:  Owner/Service Technician at S & J Small Engines
87465640
Type Your Small Engine Question Here...
JohnF2015 is online now
A new question is answered every 9 seconds

PART THAT GOES FROM THE HANDLE TO THE PART THAT WILL GIVE

Customer Question

I AM LOOKING FOR THE PART THAT GOES FROM THE HANDLE TO THE PART THAT WILL GIVE THE GAS WHEN THE HANDLE IS PULLED.
THE MODEL # ***** THE SNAPPER IS MR216518B PART # ***** 6.5 HP.
I CAN FIND THE MOD. # ***** THE PART # ***** BUT NOT PART # *****
DO THEY STILL MAKE HE PART # *****?
Submitted: 1 year ago.
Category: Small Engine
Expert:  JohnF2015 replied 1 year ago.

Hi, my name is***** will be assisting you.

Give me a moment and I will see what I can find for you.

Expert:  JohnF2015 replied 1 year ago.

I am a bit confused when you say give the gas. Your model machine does not show a throttle control on it that would give it gas. Are you referring to the cable that goes from the upper handle control bail that you have to hold down in order for the machine to run? The 80458 is not the part number for the part it is part of the model information for the machine.

Expert:  JohnF2015 replied 1 year ago.

What I believe that you are looking for is the engine control cable which is part number 7034608YP this should be available through your local dealer or you can purchase online.